Oil- and gas-fired boiler systems for industrial steam projects of 10 t/h and above, with configuration selected for the fuel and operating conditions.
MODEL & OPERATING PARAMETERS
Oil & gas steam boilers
Our industrial oil and gas steam boiler range covers 15–240 t/h with design pressures of 1.25–9.8 MPa. Each model covers a subset of this range. The SZS and HY model table below retains the rated steam pressures and temperatures from the original datasheet.
| Model / configuration | Output | Rated steam pressure | Basis |
|---|---|---|---|
| SZS35-1.25-Q | 35 t/h | 1.25 MPa | Natural gas; 184 °C |
| SZS40-1.6-Q | 40 t/h | 1.6 MPa | Natural gas; 194 °C |
| SZS45-1.25-Q | 45 t/h | 1.25 MPa | Natural gas; 184 °C |
| HY-130/5.3-Qg | 130 t/h | 5.3 MPa | Blast-furnace gas; 485 °C |
| HY-130/9.8-Qg | 130 t/h | 9.8 MPa | Blast-furnace / coke-oven gas; 540 °C |
Product data & references: Original model parameter sheet · Gas boiler catalogue range
Match the burner to the fuel
Specify the gas composition and supply pressure, or the liquid-fuel grade and properties. Burner configuration and controls are selected against the required load range.
Define the operating duty
Share steam pressure, temperature and demand at normal and peak production. Heat recovery, water treatment and emissions-control scope are reviewed for the installation.
PLAN YOUR BOILER PROJECT
What we need to specify your system
- Fuel type, composition and available supply pressure
- Required steam output or thermal oil heat duty
- Process temperature, operating hours and applicable local requirements
Product configuration & technical illustrations
The source diagrams below show product configurations. Confirm the final specification with our engineering team.
